RIKEN LOAD MONITORING PLA-4N

4-Channel Load Monitoring System

PLA-4N Stage2

*First released in China, Taiwan and Korea

PLA-4N Stage2 has the function of detecting the press load with four(4) pieces of strain gauge sensors. It displays the accurate load during press processing, and output stop signals and stops a press machine immediately when abnormality is detected. Monitoring cannot be ignored when there are eccentric loads for each stroke, and furthermore, load monitoring extends the life of dies, prevents friction and wear of presses, also promotes quality control and rationalization.

Features

Easy to know the balance of loads applied to the left and right sides of the press, and to know improper balance, load center, etc., it facilitates die maintenance and quality control.
As a overload protector, it prevents from the damage of the dies by detecting double hits, mis-feed, change of material thickness etc., and estimates die regrinding intervals.
By knowing the suitable load for products, the selection of the press is facilitated.
The detector can be used to simultaneously set absolute value comparison (set value of upper/lower limits) and comparison with the value of the previous time.
The digital LED display is easy to read, and the bar display shows the left load and the right load in percentage.

Specifications

●Power Supply and Output section	Power supply	85-264 VAC, 50/60Hz
	Power consumption	75W or less
	Output contact	1A・1B(emergency stop output / auxiliary output)
	Output contact capacity	250VAC or less, 5A or less Cosφ=1
●Detection section	No.of channels	4 channels
	Detection range	100kN or more, available for press up to 90,000kN in capacity
	Repeatability	within 1% of device press capacity/Within 100-800% of channel capacity
	Sensor	Strain gauge type 4-bridge strain sensor
●Display section	Display	1/2 inch 7-segment red LED, five-digit (per channel)
●Others	Backup	With semiconductor memory, backup time:10 years or more
	Maximum SPM	2,000 spm
	Temperature range	working: -10℃-40℃(non freezing) / Storage:-20℃-55℃
	Humidity range	10-85%RH (at wet bulb temperature of 229℃ or less, non condensation)

Untuk informasi harga, Penawaran dan Stok Barang silahkan hubungi kami di bawah ini:

PT. HIKMAH JAYA SENTOSA
JL. Puskesmas No 36 Kebagusan Pasar Minggu
Jakarta Selatan 12520 Indonesia
: 62-21 2278 3971, 781 9193
: 62-21 2270 1404
: 0852 1673 8806