RIKEN DIE MONITORING MICRON-3

Multi-Functional High Resolution Automatic Die Monitoring System

MICRON-3

MICRON3 is a High Resolution Slug Detector for press operation that monitors the position of bottom dead center (BDC) every stroke using high performance proximity sensor. Setting the upper and lower monitoring limits based on the reference value calculated automatically by the sampling, when the detected value exceed the monitoring range, the device sends a stop signal immediately to the press machine.
This device adapts Mean Value(Rolling Average) Monitoring Method and Absolute Value(Bench Mark) Monitoring Method, thus enable to perform more accurate and stable detection.

Features

High accuracy with 0.1μm resolution.
Simultaneously monitors rolling average and benchmark.
Fault counter function incorporated.
Automatic sensor calibration incorporated.
Various sensors are provided.

Specifications

●Power Supply and Output section (only MIC3-B)	Power supply	AC100-240V　50/60Hz
	Power consumption	15W or less
	Output contact	1A, 1B (emergency output,auxiliary output)
	Output contact capacity	250VAC or less, max.5A Cosφ=1
●Detection section	No.of channels	2 channles (Max.8, modification required)
	Detection range	0.8mm-1.8mm
	Repeatig accuracy	1μm (0.1μm at high sensitivity)
	Monitoring range	Average ±99μm
	Sensor type	Proximity sensor for slug detector
●Display section	Display	7-segment LED
●Others	Backup	Semiconductor memory, Backup period: 10 years or more
	Maximum speed	2,400 spm
	Temperature range	Working:-10℃-50℃(non freezing) / Storage:-20℃-75℃
	Humidity range	10-85%RH (at wet bulb temperature of 29℃ or less, non condensation)

Untuk informasi harga, Penawaran dan Stok Barang silahkan hubungi kami di bawah ini:

PT. HIKMAH JAYA SENTOSA
JL. Puskesmas No 36 Kebagusan Pasar Minggu
Jakarta Selatan 12520 Indonesia
: 62-21 2278 3971, 781 9193
: 62-21 2270 1404
: 0852 1673 8806