RIKEN DIE PROTECTION RDM-4

Strain Monitoring Die Protection System

RDM-4

Only to press the setup button, RDM sets the best monitoring range automatically.

RDM is epochal new product designed and developed to make precise detection for slug by jamming die hitherto difficult to detect. The unit checks delicate changes accurately at a time slug is produced or other changes occur and stop the press machine promptly. An analog wave form produced at each stroke of the press machine is detected by a sensor mounted on the frame of the press machine and operationally processed with a built-in microcomputer to ascertain right or wrong. using with our slug detector MICRON-3, more effective detection is available.

Features

Easy to use.
Start operating with the simple push of the setup button after changing dies.
Interactive LCD dramatically simplifies operation.
Sensors are mounted to the press, eliminating the need to adjust sensors at every die change.
RDM’s unique “Area under the curve comparison method” enable to detect floating slug, slug pulling for jamming dies hitherto difficult to detect.
Supports a wide range of fault detection, double sheet feeding, material end, mis-feeding, etc.

Specifications

●Device Proper	Model	RDM
	Power supply	100-240V AC　±10% 50/60Hz
	Power consumption	15W
	Output	Relay contacts 1A,1B(240V AC, 5A)　CosΦ=1
	Analog output	0-5V (left/right load wave)
	Response time	Display 600spm, stopping ability 2,000spm
	Display	Numeric value equivalent to working load
	Sensitivity	0.01mV/V（24X10-6 strain, 50% load)
	Temperature drift	-5℃-+60℃, 0%
●Sensor	Model	LUM-420A
	Measuring range	±600μst
	Sensitivity	1mV/μ (400μ strain)
	Temperature drift	0.1%　FS/℃
	Working temperature range	-10℃-+80℃
	Outside dimensions	30(D) X 68(W) X 10(H) mm
	Mounting pitch	40mm　±0.1mm

Untuk informasi harga, Penawaran dan Stok Barang silahkan hubungi kami di bawah ini:

PT. HIKMAH JAYA SENTOSA
JL. Puskesmas No 36 Kebagusan Pasar Minggu
Jakarta Selatan 12520 Indonesia
: 62-21 2278 3971, 781 9193
: 62-21 2270 1404
: 0852 1673 8806